Overview
Ronseal Kitchen and Bathroom Sink, Bath, Appliances Touch-Up Enamel covers chips and groves in enamel, porcelain, acrylic, fibreglass and appliances. An easy to use system with everything you need to touch up your sink, toilet or bath.
- Can be used on flaws, scratches, chips, defects and minor damage
- Waterproof finish
- Leaves a long lasting smooth white finish
- Suitable for porcelain, acrylic, fibreglass and appliances
| Area | Interior |
| Recommended Use | Sinks, baths, porcelain, ceramic tiles, washing machines, kitchen stoves & refrigerators |
| Drying Time | Touch dry in 1 hour |
| Re-Coat Time | 2 hours |
| Recommended Coats | 2-3 Coats |
| Application Method | Brush included |
Preparation
Always make sure the area to treat is clean, dry and free from any loose material.
- Test the colour of the enamel on a small hidden area to ensure you are happy with the colour match.
- Lightly sand the damaged area and wipe down with a damp cloth.
- Leave to dry before commencing.
Application
We recommend always following the manufacturer's instructions found on the tin. Shake thoroughly, it is recommended that a small test area is applied before treating the entire surface to ensure compatibility.
- Shake the bottle for two minutes before use.
- Brush on the first coat.
- Allow 2 hours for it to dry.
- Apply another 1-2 coats, leaving 2 hours between each.
- The area will be touch dry in 1 hour, please wait 24 hours before getting it wet.
- Allow to dry for four days before submerging the area in water.
- Once the repaired area is completely dry, you can clean it as normal.
Aftercare & Storage
Regularly inspect the area for any additional chips or scratches. If you notice any, you just need to clean the area and apply another coat.
