Overview

Ronseal Kitchen and Bathroom Repair Kit is an easy way to fix chips in your sink, bath and appliances. The kit includes everything you need in one package including a small applicator, hardener, filler and touch-up enamel. It will leave you with a tough hardwearing repair that won’t chip or peel off.

All in one pack
Waterproof
Suitable for porcelain, enamel, acrylic and fibreglass

Area	Interior
Recommended Use	Sinks, baths, showers, white goods & tiles. Don’t use on plastic
Base	Oil Based
Coverage	8m² per litre
Drying Time	Filler: 30 minutes, Enamel: 24 hours
Recommended Coats	1 Coat
Application Method	Brush
VOC Levels	High

Preparation

Always make sure the area to treat is clean, dry and free from any loose material.

Test the colour of the enamel on a small hidden area to ensure you are happy with the colour match.
Lightly sand the damaged area and wipe down with a damp cloth.
Leave to dry before commencing.

Application

We recommend always following the manufacturer's instructions found on the tin. Stir thoroughly, it is recommended that a small test area is applied before treating the entire surface to ensure compatibility.

Open windows and doors to ensure the room is well ventilated.
Starting by blending together enough filler and hardener for the job.
Use the applicator to pack the filler into the chip, leave it slightly raised .
Leave it to dry for 30 minutes.
Once dry, sand to a smooth finish. For enamel and porcelain, use the brown sandpaper. For ceramic and fibreglass us the black sandpaper with a small amount of water.
Wipe away any dust and leave to dry.
Shake the bottle of touch up enamel for two minutes.
Apply one thin coat and wait two hours to dry.
Apply another one or two coats.
It will be touch dry in one hour but leave it 24 hours before getting wet and four days until fully submerging it in water.