Overview

Leyland Trade Vinyl Matt Emulsion is a high opacity paint, so it needs fewer coats to get a good result. It goes on easily and is wipeable. The beauty of this paint is that it's suitable for most interior walls and ceilings, including bare plaster, embossed wallpaper and previously coated surfaces. It's also quick drying; touch dry in 1-2 hours and ready to recoat in 3-4. The coverage is great, up to 14m2 per litre. So, with its excellent coverage, quick drying time and high opacity, you can get the job done quickly and easily.

• High opacity, meaning fewer coats
• Goes on easily
• Wipeable
• Suitable for interior walls and ceilings including bare plaster
• Hides imperfections
• Quick drying

Preparation

Ensure that the surface you're painting is sound, clean, dry and grease free and remove all loose and defective paint.

• Prime where required with the appropriate Leyland Primer and rub down glossy surfaces with fine waterproof abrasive paper to provide a key.
• Avoid the inhalation of dust and wear a suitable face mask if dry sanding. If the surface is absorbent, seal with a solution of up to 1 part water to 9 parts Leyland Vinyl Matt.

Application

Always perform a test on a small inconspicuous area to ensure compatibility, and we recommend following the manufacturer's instructions found on the tin.

• Stir well before use.
• Don't thin the paint unless you're painting an absorbent surface, or applying it with a roller or spray, in which case a small amount of clean water may be added.
• Apply the Vinyl Matt evenly, being careful not to overspread.
• If necessary, apply a second coat after 2-4 hours. Don't apply in temperatures below 10 ̊C.

Aftercare & Storage