Overview
This durable paint from Leyland Trade is quick drying, high opacity and non-yellowing. For use on interior and exterior wood and metal, the flow is excellent and the paint is low odour. Great if you want a tough, high opacity paint without the high gloss finish. Mid sheen.
- High opacity mid-sheen finish
- Hardwearing for use on wood and metal in high traffic areas
- Quick drying
- Great coverage of up to 15m2 per litre
| Area | Interior & Exterior |
| Recommended Use | Interior and exterior wood and metal |
| Base | Water-Based |
| Coverage | up to 15m² per litre |
| Drying Time | 3-4 Hours |
| Re-Coat Time | 3-4 Hours |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush or Roller |
| VOC Levels | Low |
| Clean Up | Remove as much of the Quick Drying Satin as possible from your roller or brush and clean thoroughly immediately after applying. |
Preparation
If you're painting radiators, make sure that they are cool before applying this product
- If the surface has been previously painted with gloss, give it a good rub down with fine waterproof abrasive paper before applying a pre-coat of Leyland's Fast Drying Undercoat. Prime where needed
- Pre-1960's paint surfaces over wood and metal can contain harmful lead, so special precautions must be taken.
Application
Always perform a test on a small inconspicuous area to ensure compatibility, and we recommend following the manufacturer's instructions found on the tin.
- Stir the paint well before you start
- Apply generously and evenly with a brush or roller
- Do not apply when the surface or air temperature is below 10 degrees celsius or when it's likely to rain
- Drying time, under normal conditions, is 4 hours.
