Overview
Suitable for both interior and exterior wood and metal, Leyland Fast Drying Gloss is a non-yellowing, high opacity paint with excellent flow. It's water based and low odour, with a fast drying time and the gloss finish is tough and hardwearing. Use on window frames, doors, skirting boards, radiators and woods and metals around the home. Recoatable after 3-4 hours.
- Non-yellowing
- Fast drying - Recoat after 3-4 hours
- High opacity and coverage
- Great coverage of up to 15m2 per litre
| Area | Interior & Exterior |
| Recommended Use | Interior or exterior wood and metal |
| Base | Water-Based |
| Coverage | Up to 15m² per litre |
| Drying Time | 3-4 Hours |
| Re-Coat Time | 3-4 Hours |
| Recommended Coats | 1-2 Coats |
| Application Method | Brush |
| VOC Levels | Low |
| Clean Up | Remove as much of the Fast Drying Gloss as possible from your brush and clean immediately with warm soapy water. Secure the lid firmly. |
Preparation
If you're painting radiators, make sure that they are cool before applying this product
- If the surface has been previously painted with gloss, give it a good rub down with fine waterproof abrasive paper before applying a pre-coat of Leyland's Fast Drying Undercoat.
- Prime where needed
- Pre-1960's paint surfaces over wood and metal can contain harmful lead, so special precautions must be taken.
Application
Always perform a test on a small inconspicuous area to ensure compatibility, and we recommend following the manufacturer's instructions found on the tin.
- Do not stir.
- Apply generously and evenly with a brush, being careful not to over spread.
- If it's likely to rain, or the temperature is below 10 degrees celsius, do not apply.
- Keep doors and windows ajar until the paint is fully dry.
